Electrical Discharge Sawing Machines
Electrical Discharge Sawing Machine (EDS)
I. Benefits you can get with our Electrical Discharge Sawing Machines (EDS)
1. You can improve the cutting efficiency greatly with EDS machines:
Our EDS machine can cut the hardened alloys at the max cutting speed of 2300 square mm/min, which is at least 2 times higher than the normal band saw machine);
2. You can save the cutting saw blade cost greatly with EDS machines
The material of the electrode on our EDS machine is meld steel sheet, which cost is very low: around 1.5USD/piece, comparing the saw blade: 500USD/piece;
3. You can save the job material cost greatly.
The cutting path width with EDS machine is smaller than the band saw: around 1.5-2mm, comparing the saw blade path: 3mm, so you can save a lot of material during the long time operation period.
II. Features of Electrical Discharge Sawing Machine (EDS)
EDS machine can cut any special hardened conductive material, no matter how hard it is, such as ESR (electrode slag remelting) steel ingots, high-temperature heat-resistant alloys, high chromium, high nickel alloy, and titanium alloy, etc. It is very difficult for band saw machine to cut above materials, and the saw blade wears off quickly too,
III. Advantages of Electrical Discharge Sawing Machine (EDS)
1. Super high cutting speed: Max :2300mm2/min;
2. Much lower tool cost: mild steel blade around 1.2USD/piece;
3. Smaller cutting path width: 1.5-2mm
IV. Main specification
Parameters/ Model No. | EDS350 | EDS600 | EDS1100 |
Max. cutting diameter (mm) | φ350 | φ600 | φ1100 |
Max. work piece width (mm) | 810 | 1000 | 1100 |
Max. cutting travel (mm) | 400 | 750 | 1200 |
Max. cutting length (mm) | Unlimited | Unlimited | 500 |
Worktable (mm) | 800x2000 | 1800x900 | 1200x2500 |
Worktable travel (mm) | 800 | ||
Max cutting speed (mm2/min) | 2300 | ||
Max. worktable load (Kg) | 2500 | 3000 | 20000 |
Electrode size(L) (mm) | 7420 | 9550 | 9550 |
Cutting gap(mm) | ≤2 | ||
Electrode Material (mm) | Mild steel: 0.7~1.2 (T)x25-40(W) | ||
Max. output current (A) | 500 | 800 | 1000 |
Controller | German Siemens | ||
Feeding motor | Panasonic AC servo motor |
V. Feedback of Our clients: