Video of Electrical Discharge Sawing Machine
Video of Electrical Discharge Sawing Machine (EDS)
Here is a small video of our Electrical discharge sawing machine for your reference:
Benefits you can get with our Electrical Discharge Sawing Machines (EDS)
1. You can improve the cutting efficiency greatly with EDS machines:
Our EDS machine can cut the hardened alloys at the max cutting speed of 2300 square mm/min, which is at least 2 times higher than the normal band saw machine);
2. You can save the cutting saw blade cost greatly with EDS machines
The material of the electrode on our EDS machine is meld steel sheet, which cost is very low: around 1.5USD/piece, comparing the saw blade: 500USD/piece;
3. You can save the job material cost greatly.
The cutting path width with EDS machine is smaller than the band saw: around 1.5-2mm, comparing the saw blade path: 3mm, so you can save a lot of material during the long time operation period.