DK7732ZC.jpg



Wire Cut EDM Machines

 

I.            Benefits you can get with our EDM Wire Cut Machines: 

1.   You can cut larger type dies molds with a taper angle: +/-30 degrees at a better accuracy.

The max x/y/z travel of the wire cut EDM machine we make is 2000mm*3000mm*1000mm, and the max taper angle is +/-30 degrees and its cutting accuracy is 0.01mm. It is difficult for the low speed brass wire EDM machine to cut the larger jobs. If your jobs do not request a special accuracy, our wire EDM machine is quite suitable for your jobs.


2.   You can save the wire EDM machine cost greatly.

The wire EDM machine cost is around 1/3 of the similar type brass wire EDM machine. If your jobs are larger, like auto die molds, home application jobs molds, which do not require a special higher accuracy, the molybdenum wire EDM machine we make is a good choice for you.

3.   You can save consumable part EDM wire cost greatly.

The electrode wire material is molybdenum with our wire EDM machine. And the molybdenum wire can be used repeatedly, comparing the one time cutting brass wire to be through away. So its main consumable wire cost is lower than the brass wire type EDM machine: around 20% of brass wire EDM machine; Molybdenum wire is reusable and it can be used for 4-5 days/each time.


II.           Features of Wire Cut EDM Machines (WEDM)

1.     The wire cut EDM machine we make can cut all metal jobs with a good surface finish, such as high-temperature heat-resistant alloys, high chromium, high nickel alloy, titanium alloy.

2.     The types of wire cut EDM machine we make are various, from320*400*500mm to 2000mm/3000mm/1000mm are available.

3.     The wire cut EDM machine can cut a job with a max tape of +/-30 degrees.


III.         Advantages of Wire Cut EDM Machines (WEDM)

 

1.   Super high cutting speed: Max :200mm2/min;

2.   The cutting accuracy on our wire cut EDM machine is 0.01mm

3.   The best roughness on our wire cut EDM machine is less than1.0 um.


IV.         Main specification

Parameters/ Model No.

TW040

TW050

TW063

TW080

TW100

X/Y Travel (mm)

400*500

500*630

630*800

800*1000

1000*1200

Worktable (mm)

490*790

570*920

690*1090

830*1290

1000*1600

Max cutting height (mm)

500

500

500

500

500

Taper angle

A type:±3°/(Optional B type: ±30°)

Max cutting speed

200

Finish (one cutting) (um)

≤2.5

Finish (Multi cutting) (um)

≤1.0

Precision (mm)

≤0.01

Weight (kg)

2000

2300

2800

3300

4000

Motor

Step Motors on X/Y axis( Servo motors are optional)

Machine size(cm)

185*140*180

200*160*180

220*185*180

240*205*180

260*300*190

 

 

V.          Feedback of Our clients:


Clients are Satisfied with our Wire cut EDM machines.png